NORM'S ROTOR SERVICE
TM
|
|
New or Rebuilt Rotors and Controls for SaleRotors are listed by wind load capacity1 - descending |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
Click below to ... |
Manufacturer |
| Custom rotor Control Cables Cut to length with your Choice of Connector pre-installed. Call to discuss your particular needs; available for any model rotor and control unit combination that we sell or service | - | RC | - | - | Check status | NRS | |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
| HDR-300A Rotor & Control - 1 year warranty, rated at 25 sq. ft. wind load, solenoid operated locking brake, digital Control | 25 | HDR300A | $1999 | C | Telex, Hygain | ||
 |
HDR-300A Rotor Only - with stainless steel output shaft | - | 740200-1 | - | C | Telex, Hygain | |
 |
HDR-300A Control Only - switch selection of North or South centered operation | - | 871869 | - | - | C | Telex, Hygain |
| HDR-300 Rotor & Control - 1 year warranty, rated at 25 sq. ft. wind load, solenoid operated locking brake, digital Control | 25 | HDR300 | - | - | C | Telex, Hygain | |
|
HDR-300 Rotor Only - with steel output shaft | - | 871159 | $699.00 | - | C | Telex, Hygain |
|
HDR-300 Control Only | - | 871869 | - | C | Telex, Hygain | |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
T2X Rotor and Control - 1 year warranty, rated at 20 sq. ft. wind load, solenoid operated locking brake, analog metered Control | 20 | T2X | $1079 | $1224 | C | CDE, Telex, Hygain |
 |
T2X Rotor Only | - | 51377 | $779 | $889 | C | CDE, Telex, Hygain |
 |
New Hy-Gain Antenna Rotator Direction Controller plus (C/u only) | - | RDC+ | - | $479 | C | Hygain |
|
Rebuilt older T2X control with 8 screw terminal strip but with new style front panel and meter; with BD-189 brake delay installed. | - | R-RDC | $299 | - | C | CDE, Telex, Hygain |
 |
Rebuilt standard T2X Control only (analog meter) with BD-189 brake delay installed | - | 51403BD | $249 | - | C | CDE, Telex, Hygain |
 |
T2X Control Only with DIGITAL readout (limited availability... Call or email before ordering) | - | 51403PS | $299 | - | C | CDE, Telex, Hygain, Prosearch |
 |
DCU-1 Digital Control only | - | 870804 | $649 | $849 | C | Telex, Hygain |
 |
DCU-2 Digital Control only | - | DCU-2 | - | $579 | C | Hygain |
|
|
DCU-3 Digital Control only | - | DCU-3 | - | $715 | C | Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Ham 4 New or Rebuilt -1 year warranty, rated at 15 sq. ft. wind load, solenoid operated locking brake, analog metered Control | 15 | Ham4 | $779 | $889 | C | CDE, Telex, Hygain |
 |
Ham 4 Rotor Only | - | 51372 | $679 | $799 | C | CDE, Telex, Hygain |
|
Any of the controls listed for T2X above can be used with the Ham4 | - | - | - | - | C | Hygain |
 |
Rebuilt standard Ham 4 Control Only (analog meter) with BD-189 brake delay installed | - | 51565BD | $225 | - | C | CDE, Telex, Hygain |
|
Ham 4 Control Unit only with DIGITAL readout (limited availability...Call or email before ordering) | - | 51565PS | $299 | - | C | CDE, Telex, Hygain, Prosearch |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
| Ham 4 Euro - Ham 4 rotor and Ham 4 Control wired for 220 v Eurapean operation | 15 | Ham4X | - | C | CDE, Telex, Hygain | ||
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
| Ham SP - Ham 4 Rotor and Ham SP Braille Control Unit | - | HamSP | $799 | - | C | CDE | |
 |
Ham SP Control only - marked visually and in Braille | - | 51747 | $399 | - | C | CDE |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Ham 3 Rebuilt - 1 year warranty, rated at 12.5 sq. ft. wind load, solenoid operated locking brake, analog metered control | 12.5 | Ham3 | $699 | - | C | CDE |
 |
Rotor Only | - | 51451 | $649 | - | C | CDE |
 |
Ham 3 Control Only with BD-189 brake delay installed | - | 51435 | $199 | - | C | CDE |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Heavy Duty Lower Mast Support for H3, H4, and T2X - complete with Stainless steel hardware. Accepts 1-7/8" to 2-5/8" O.D. Mast and centers on 2-1/2" |  |
51467 | $149 | $179 | C | Telex, Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Ham 2 Rotor and Control - 1 year warranty, rated at 10 sq. ft. wind load, solenoid operated locking brake, analog metered control (Note 1) | 10 | Ham2 | $679 | n/a | C | CDE |
|
Ham 2 Rotor Only | - | 50232 | $599 | n/a | C | CDE |
 |
Ham 2 Control Only with BD-189 brake delay installed | - | 50940BD | $199 | n/a | C | CDE |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
BD-189 Brake delay KIT ... may be ordered with any of the control units above...or upgrade your control unit... Click for more info. | - | BD189 | Click for more info. | Buy now | NRS | |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Ham M Rebuilt - 1 year warranty, rated at 10 sq. ft. wind load, solenoid operated locking brake, analog metered control (Note 1) | 10 | HamM | n/a | C | CDE | |
|
Ham M Rotor Only | - | 50232 | n/a | C | CDE | |
 |
Ham M Control Only | - | 50192 | n/a | C | CDE | |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
HD-73 Rotor & Control - 1 year warranty, rated at 10 sq. ft. wind load, mechanical disc brake, metered control. Supplied with one set of mast clamps only. For a second set of mast clamps to mount on a mast see below. | 10 | HD73 | $679 | - | C | Alliance |
 |
HD-73 Rotor Only | - | 19400R | $549 | n/a | C | Alliance |
 |
HD-73 Control Only | - | 19531R | $199 | n/a | C | Alliance |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
HD-73-1 Rotor & Control - 1 year warranty, rated at 10 sq. ft. wind load, mechanical disc brake, metered control. Supplied with one set of mast clamps for tower mounting. For a second set of mast clamps for mast mounting - see below. | 10 | HD731 | $679 | $799 | C | Alliance |
|
HD-73-1 Rotor Only | - | 19400R | $549 | n/a | C | Alliance |
 |
HD-73-1 Control Only | - | 22500R | $209 | n/a | C | Alliance |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Lower Mast Clamps for Alliance HD73 or HD73-1 rotor Complete with ALL STAINLESS STEEL mounting hardware. Used to mount an HD73/Hd73-1rotor to a mast. NOT required for tower mounting. |  |
20089R | $99.00 | $124 | C | Alliance |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
CD 45-II Rotor & Control - 1 year warranty, rated at 8.5 sq. ft. wind load, mechanical disc brake, metered control | 8.5 | CD45II | $550 | $669 | C | CDE, Telex, Hygain |
 |
CD 45 Rotor Only | - | 51571 | $399 | $515 | C | CDE, Telex, Hygain |
|
CD 45 Control Only | - | 51565 | $225 | $399 | C | CDE, Telex, Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
CD-44 Rotor and Control - 1 year warranty, rated at 7.5 sq. ft. wind load, mechanical disc brake, metered control | 7.5 | CD44 | $525 | n/a | C | CDE |
 |
CD 44 Rotor Only | - | 50241 | $389 | n/a | C | CDE |
|
CD 44 Control Only | - | 50940 | $199 | n/a | C | CDE |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
TSP-1 - Tower mounting plate lift rotor 1/2" above tower plate to allow control cable and terminal strip clearance. |  |
TSP-1 | - | $89 | C | Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
TR-44 Rotor & Control - Rebuilt -1 year warranty, rated at 7.5 sq. ft. wind load, mechanical disc brake, metered control | 7.5 | TR44 | n/a | C | CDE | |
|
TR44 Rotor Only | - | 50241 | n/a | C | CDE | |
|
TR44 Control Only | - | 50192 | n/a | C | CDE | |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
BT-1 Rotor and Control - 1 year warranty, rated at 5 sq. ft wind load, mechanical disc brake. | 5 | BT1 |
n/a | C | CDE | |
 |
BT-1 Rotor only | - | 51308 | - | n/a | C | CDE |
 |
BT-1 Control only - Manual or automatic operation. Manual operation by turning compass dial to desired setting. Automatic operation by way of 4 presets accessible from the front panel | - | 51297 | - | n/a | C | CDE |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
U-110 Rotor & Control - 1 year warranty, rated at 5 sq. ft. wind load, rotor for azimuth & elevation use, light duty. Last of the American made all metal gear train construction rotors, NO plastic gears | 5 | U110 | - | - limited availability |
C | Alliance |
 |
U110 Rotor Only, last of the American made all metal gear train construction rotors, NO plastic gears | - | 8910R | - | - | C | Alliance |
 |
U110 Control Only | - | 21448R | - | - | C | Alliance |
 |
TBB-1 Thrust bearing for U100/U110 | - | TBB-1 | - | - | C | Alliance |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
U-100 Rotor & Control - 1 year warranty, rated at 5 sq. ft. wind load, rotor for azimuth & elevation use, light duty. Last of the American made all metal gear train construction rotors, NO plastic gears | 5 | U100 | - | we have parts to rebuild yours | C | Alliance |
|
U100 Rotor Only, last of the American made all metal gear train construction rotors, NO plastic gears | - | 8910R | - | - | C | Alliance |
 |
U100 Control Only | - | 18649R | - | n/a | C | Alliance |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
AR-40 Rotor & Control - 1 year warranty, rated at 3 sq ft. wind load, mechanical disc brake, light duty | 3 | AR40S2 | limited availability |
$559 | C | CDE, Telex, Hygain |
| - | Rebuilt rotor and old style rebuilt Control | - | AR40S1 | - | - | C | CDE, Telex, Hygain |
 |
Rotor Only | - | 50854 | - | $334 | C | CDE, Telex, Hygain |
 |
Rebuilt old style Control only | - | 50796 | - | - | C | CDE, Telex, Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
| AR-33 Rotor & Control - Designed to rotate and support the largest FM, TV and compact VHF and UHF communication antenna arrays. (Ideal for HDTV antennas) | 3 | AR33 | n/a | C | CDE, Telex, Hygain | ||
|
AR33 Rotor Only | 50638 | - | n/a | C | CDE, Telex, Hygain | |
 |
AR33 Control Only - Control offers choice of manual operation, just turn the compass dial to the heading desired and the rotor moves to that position. Also automatic control via 5 pushbuttons that can be pre-set to the 5 most frequently viewed channels. | - | 50535 | - | n/a | C | CDE, Telex, Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
AR-22 Rotor and Control - Designed to rotate large television antennas. Will support stacked arrays and deep fringe area antennas. | 3 | AR22R | n/a | C | CDE, Telex, Hygain | |
|
AR22 Rotor Only | - | 50429 | n/a | C | CDE, Telex, Hygain | |
 |
AR22 Control Only | - | 50065 | - | n/a | C | CDE, Telex, Hygain |
Model |
Description |
Wind load sq ft. |
SKU # |
Rebuilt + shipping* |
New + shipping* |
||
 |
Light Duty Lower Mast Support for AR,
BT, CD and TR series rotors. Complete with aluminum antenna clamp plate and
stainless
steel mounting hardware 1.37" (35mm) to 2.062 (52mm) 1.9 OD steel mast recommended. |
 |
51472P | $99 | $124 | C | CDE, Telex, Hygain |
| - | Same as above - correct for Ham-M and Ham-2 or upgrade for the AR/CD series rotors. NOTE: furnished complete with ALL STAINLESS STEEL mounting hardware including mast clamp plate | - | 51472S | $124 | $149 | C | CDE, Telex, Hygain |
|
TSP-1 - Tower mounting plate lift rotor 1/2" above tower plate to allow control cable and terminal strip clearance. | |
TSP-1 | - | $89 | C | Hygain |
 |
2" OD x 20 ft (approx) Chrome-moly antenna mast 1/2" wall (not 1/4!!!) *used
|
MAST | $199 | - | pick-up only |
1 Wind load rating is for a rotor mounted in a tower on a rotor plate, when mast mounting a rotor using the lower mast adapter derate the rotor wind load capacity by 50%.
* Prices do not include shipping. Shipping is determined by weight, destination, carrier and speed of delivery desired for each order
. Click here to see typical shipping times.
All Rotors are subject to prior sale. All prices are subject to change without notice.
Check with us before you order.
While we make every attempt to publish accurate information on this web site, it is possible than the occasional typographical error may creep through. We are not bound to prices published through honest error; we reserve the right to correct an erroneous price at the time of sale.
We accept 
, Checks (allow
10 working days for Check to clear our bank) and Money Orders.
No COD orders.
|
|
